OldGuydust
Posts : 81 Join date : 2012-06-09 Location : 79936
| Subject: sc10 ,castle gearing for hals? Tue Jun 19, 2012 9:27 am | |
| Can anyone tell me what would be good gearing for hals? Im running an sv2 with castle 3900kv... Thanks?
| |
|
nmdesertracer
Posts : 454 Join date : 2011-07-22 Age : 112 Location : New Mexico
| Subject: Re: sc10 ,castle gearing for hals? Tue Jun 19, 2012 10:36 pm | |
| Thats around a 9.5 turn lrp motor KV wise. Manual says 18/84 and check your temps after 5 min. | |
|
OldGuydust
Posts : 81 Join date : 2012-06-09 Location : 79936
| Subject: Re: sc10 ,castle gearing for hals? Tue Jun 19, 2012 11:26 pm | |
| Thanks... I just re-read the castle specs and gearing chart and it says for that 1406 4600kV series motor to use an 87t spur and 12-16T pinion.... yes its a 4600Kv, my mistake... I was thinking 14/87 setup..? | |
|
nmdesertracer
Posts : 454 Join date : 2011-07-22 Age : 112 Location : New Mexico
| Subject: Re: sc10 ,castle gearing for hals? Wed Jun 20, 2012 12:03 am | |
| Im not sure but I think hals said in there news letter that 10.5 was the lowest you could go in 2wd sc. The motor you have is gonna probably be to fast for hals IMO. 10.5 or 13.5 is perfect for the slower sections. | |
|
OldGuydust
Posts : 81 Join date : 2012-06-09 Location : 79936
| Subject: Re: sc10 ,castle gearing for hals? Wed Jun 20, 2012 1:42 pm | |
| Oh shoot, I gotta look into that.. Im still not too good on converting the kV over and knowing the motor size.... Thank you for the help. | |
|
nmdesertracer
Posts : 454 Join date : 2011-07-22 Age : 112 Location : New Mexico
| Subject: Re: sc10 ,castle gearing for hals? Wed Jun 20, 2012 5:17 pm | |
| no problem if you need setup tips or anything for the sc10 talk to me or Wes.. | |
|
Sponsored content
| Subject: Re: sc10 ,castle gearing for hals? | |
| |
|